Add to Cart
Choosing a suitable camera is also an important part of machine vision system design. The selection of a camera not only directly determines the resolution and quality of the captured images, but also is directly related to the operating mode of the entire system.


● Gigabit Ethernet interface, providing 1Gbps bandwidth with a maximum transmission distance of 100m;
● 128MB on-board cache for data transmission or image resend;
● Support Software Trigger/Hardware Trigger/Free Run Mode;
● Support ISP functions including Sharpness/Denoising/Gamma/LUT/Black Level Correction/TargetBrightness/Contrast etc.;
● Support multiple image data formats output/ROI/Binning/Mirror, etc.;
● Conform to GigE Vision V2.0 protocol and GenICam standard;
● DC 9V~24V wide voltage power supply; Conform to CE, FCC, RoHS;
| Basic | |
| Sensor | AR0521 |
| Image Sensor | 1/2.5"CMOS |
| Shutter | Rolling |
| Resolution | 2592 × 1944 |
| Frame Rate | 23 fps |
| Bit Depth | 12 |
| Mono/Color | Mono |
| Pixel Size | 2.2 μm × 2.2 μm |
| Image | |
| Pixel | 5.0MP |
| S/N Ratio | 40dB |
| WDR | 74.3dB |
| Image Format | Mono8/10/10Packed/12/12Packed |
| Binning | Support |
| ROI | Support |
| Gain | 1~32 |
| Gamma | From 0 to 4,support LUT |
| Exposure Time | 21.5μS~1S |
| Trigger Mode | Software Trigger/Hardware Trigger/Free Run Mode |
| SPC | Support |
| Performance | |
| User Setting | Support two sets of user-defined configurations |
| Image Buffer | 64MB |
| Port | |
| Port | GigE |
| GPIO Interface | 1x 6 pin Hirose: 1x Opto-isolated input, 1x Opto-isolated output, 1 configurable input and output |
| Lens Mount | C-mount |
| Power | |
| Power Supply | DC 9V~24V power supply via Hirose interface |
| Power Consumption | 12V≈2.8W |
| Structure | |
| Product Dimensions | 29mm*29mm*29mm |
| Net Weight | 60 g |
| Environment | |
| Storage Temperature | - 30℃~+80℃ |
| Operating Temperature | - 30℃~+50℃ |